Filter
Top Products
32
Answering system operation
1.
SETUP
3.
SETUP
- OR-
Press until the desired feature
is heard (see list on right).
Press until the desired
selection is heard.
Press to set selection and
move to next setup option.
Press to set selection and
exit setup.
2.
SKIP or
REPEAT
(PLAY/STOP)
Changing feature options
Setup features can be changed to program how the
answering system operates. Press SETUP repeatedly to
hear each feature. When you hear the feature you want
to modify, press SKIP or REPEAT to change the set-
ting.
Feature options (Default settings underlined).
System announces: Feature description:
"Number of rings", current set-
ting, then "To change the setting,
press SKIP or REPEAT; to con-
tinue setup, press SETUP".
Options: 2 / 4 / 6 /toll saver
“Base ringer”, current setting,
then “To change the setting
press SKIP or REPEAT; to con-
tinue setup, press SETUP”.
Options: off/ low/ high
"Remote access code", current
setting, then "To change the set-
ting press SKIP or REPEAT; to
continue setup, press SETUP".
Options: (enter two-digit code)
19
"Message alert tone", current
setting, then "To change the set-
ting press SKIP or REPEAT; to
continue setup, press SETUP".
Options: on / off
Choose the number of rings before the
system answers a call. When toll saver
is active, the system answers after two
rings if there are new messages, and
after four rings if there are no new mes-
sages. When retrieving messages from a
long-distant call, you may disconnect the
call after three rings so that long-distant
charges will not be charged.
Choose this option to turn the base ringer
volume off, low or high (does not affect
cordless handset)
Enter a two-digit number (10-99) for
remote access from another telephone
(see page 36).
When on, the telephone beeps every 10
seconds when there are new messages.
NOTE: Press and hold SKIP
or REPEAT to increase or decrease
the remote access code number by 10.
16