Product Overview MT8850A / MT8852A Bluetooth Test Set
13000-000109 2-3
June 2003 The MT8850A/MT8852A
•
•
•
•
•
Editing tests
Define your own test scripts to customize the test measurements to your specific
requirements. Each test can be enabled or disabled and within any test, parameters
such as hopping can be enabled or disabled, the number of measured packets
defined, and the specific frequencies of testing set up.
Making a link
The BT address can be acquired by entering it manually at the keyboard, by
performing an inquiry, or by means of an RS232 or USB HCI link. Once the EUT BT
address is known a Bluetooth link is established using Paging.
Field upgradeable
The Bluetooth protocol stack is held in FPGA so that future versions of the core
Bluetooth specification can be installed locally. The instruments main program is held
in flash memory and so product enhancements are also field downloadable.
Design proving
Because measurements are made in accordance with the RF Test Specification,
MT8850A/MT8852A is the ideal instrument for pre-conformance testing and design
proving. Gain confidence in your product before submitting to a Bluetooth Qualification
Test Facility for approval. To perform tests such as TX output spectrum and spurious
emissions not supported by the MT8852A, use the Anritsu ME7865A Bluetooth Pre
Qualification Test System that addresses all 16 test cases defined in the RF test
specification.
Audio testing (MT8852A only)
The MT8852A Bluetooth Test Set can be used to perform audio measurements by
establishing a Synchronous Connection Oriented (SCO) link between the MT8852A
and the EUT.
BlueSuite Analysis Software
A BlueSuite software package gives PC control of the MT8850A/MT8852A for advanced
design proving measurements on Bluetooth radios. Use BlueSuite to view burst power
profiles, modulation eye diagrams, display graphs of the output power of the 79
frequencies and many other advanced diagnostic tools.