Filter
Top Products
AltiServ User Guide 29
Voice Mail
Disposing of the Messages
After or while listening to a new or saved message, you have the following
options. Press…
• 1 to delete
• 2 to replay
•3tosave
• 4 to forward a copy of the message with an introduction
• 5 to call the sender
This is the Zoomerang feature described on page 39. Press *** to
disconnect from the call and return to the AltiGen Voice Mail System.
The sender’s caller ID information is automatically captured by the
AltiServ if the caller is an internal user or an outside caller who has
either a publicly listed number or has entered their callback number in
the delivery options menu after leaving the message. But if the caller
ID is not available, you can still use the Zoomerang feature by manu-
ally dialing the number.
When using Zoomerang with Cellular or PCS phones, see the discus-
sion in the next subsection.
• 6 to reply to the message
• 7 to rewind (during message playback)
• 9 to fast forward (during message playback)
•#toskip
• (Tolistentoaskippedmessage,press1againattheMainMenu.)
Note: See your System Administrator to activate or deactivate the
announcement of time and date for each message before
playing the message content. The time stamp can beskipped by
pressing 9 during playback.
About O utcalls to Cellular or PCS Phone Numbers
When an outcall is made bythe system (for One-Number-Access, Message
Notification, Zoomerang, Call Forwarding, etc.), to a cellular or PCS
phone, it may ring the phone once but not necessarily present the call and
make a connection. This will happen if the ringback tone played by the