Filter
Top Products
26 AltiServ User Guide
To perform a normal login at your station:
Press ##, followed by your password.
To login from another station or as a virtual extension:
Press ###, followed by your extension number, followed by your
password.
Remote Login
For remote login from outside the office:
Dial your company phone number and during the Auto Attendant
greeting, press #,followedbyyourextension number,followedby
your password.
For standard remote login:
The Auto Attendant must be configured. If Auto Attendant is not used
in your office, someone in the office (such as the operator) must
transfer you into the AltiGen Voice Mail System.
There are two ways to transfer users into AltiGen Voice Mail System:
• Normally, anyone in the office is able to send an outside user into
AltiGen Voice Mail System by pressing FLASH #40 while
connected to the user.
•IfFLASH is disabled
1
, you can also login to AltiGen Voice Mail
System by pressing * during the voice mail greeting of any
extension. Ifyou’re callingyour own extension, youthen enter your
password. If you’re calling someone else’s extension, press # to
enter your extension and then your password. Please see “Transfer
to AltiGen Voice Mail System Feature” on page 27.
1
FLASH may be disabled if the operator or user is using any TAPI third party
application that does not support it.