Filter
Top Products
AltiServ User Guide 7
Telephone Features
• To park the call at another extension, press FLASH # 31 followed
by the extension number. For example, to park the call at ext. 487,
press FLASH # 31487.
2. To pickup the parked call, press #31followed by the extension
number of the station where the call is parked.
System Call Park and Silent System Call Park
System Call Park allows the user to park a call at a public “location” by
entering FLASH #41. The system announces where the call is parked—a
location number. Calls parked by a user will ring that user’s extension after
the time-out period expires.
You can enable the Silent System Call Park feature by pressing #73 on
your telephone keypad. This feature is used to disable the system from
announcing the “location” of a call when using the System Call Park
feature. This announcement is sometimes confusing when using graphic
interface applications such as AltiConsole rather than using the telephone.
It also eliminates having to wait for the location number to be announced
before moving on to the next task.
Call Waiting
To use call waiting, it must have been enabled either for the system in the
AltiWare Administrator or by the user in AltiReach. The latter is described
in “Setting Call Management” on page 44.
If a call comes in while you’re on the phone, the system will beep up to
three times over a 24 second period before the callis routed into voicemail.
To answer the call:
1. Press FLASH to put the first call on hold and simultaneously connect
to the waiting call.
2. Press FLASH again to return to the first call.
Distinctive Call Waiting Tone
If the Distinctive Call Waiting Tone option is enabled by the system
administrator,you mayhave threedifferent callwaiting tones cadencesthat
distinguish the types of calls:
• Internal Call = two tones
• External Call = one tone