Filter
Top Products
8 AltiServ User Guide
• Operator Call = three tones
Multiple Call Waiting
This feature enables a “personal” queue that allows you to handle multiple
incoming calls by letting callers wait in queue until you answer the call.
You can transfer or park calls before answering the next call in queue.
Multiple Call Waiting must be enabled for your extension by the system
administrator before it can be used.
Before being placed in queue, the caller hears an Initial Greeting.Oncein
the queue, the caller hears a Subsequent Greeting every 30 seconds. You
can change or customize these greetings in the AltiGen Voice Mail system
at the Personal Options menu as described in “Recording Greetings” on
page 9.
In queue, the callers can press pound (#) to exit the queue and leave a voice
mail message or, if your organization has an operator, press 0 for the
operator. You may want to remind users of these options in the greetings.
To answer calls in a Multiple Call Waiting situation:
• During a call,you will hear an alert tone (audio beep)for each new call
that is added to the queue.
•Ifyou hang up, the phone will ring with the next caller in queue.
1. Topark or transfer a call before answering thenext call, press the Link
or FLASH key and do one of the following:
•Totransfer the call, enter the extension or phone number and hang
up.
•Topark the call using Personal Call Park,press#31, enter an
extension number only if you want to park the call at an extension
other than your own, and then hang up (see “Call Park” on page 6).
•Topark the call using System Call Park,press#41, note the
parked call “location” number, and then hang up.
2. Answer the next call in queue; it will ring after you disconnect the
previous call.