Filter
Top Products
3
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
ABOUT THIS MANUAL
The IS system provides various manuals to meet various system planning and work processes. Use the manuals necessary for your
system.
Manual confi gurations
The following manuals are provided for a local system. Read all the manuals for installing, setting up, and using a local system, or
provide the manuals to the persons working with the system.
* The INSTALLATION MANUAL includes the contents for a standard (IP) system.
INSTALLATION MANUAL (A booklet included with the central control unit)
Used for installing and connecting control units, stations and power supply unit. (For an installer or serviceman)
SETTING MANUAL (This manual on the CD-ROM included with the central control unit)
This manual describes how to make the system settings and system maintenance. (For an installer or serviceman)
OPERATION MANUAL (An electronic manual on the CD-ROM included with the central control unit)
Information for using the system for calling, communicating, paging, monitoring, etc. (For users of the system)
PURPOSE OF THE SYSTEM SETTINGS
After the installation and connections of all the components are completed, confi gure the system settings based on how your system
is planned to be used. System settings must be completed before the system will operate.
CAUTION:
Make the settings correctly. If the settings are not made correctly, the system will not function as planned.
NOTE:
This manual is for setting a local system. To make settings for a standard (IP) system using an IP network, read
the SETTING MANUAL for the standard (IP) system.