Filter
Top Products
17
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Registering stations and PA outputs to zones
[
System setting – Zone setting]
Assign stations and PA outputs to the registered zones.
Click
1
Zone setting in the table of contents.
Select a zone from the pull-down menu.
2
Click
3
Reference
to display all the stations registered
to the system.
Another window opens and the registered stations are
displayed in the list.
Check to select the target stations.
4
Select stations in the following ways.
Select stations by checking one by one.
•
All stations of the same type can be selected by
•
clicking the corresponding button under [Select all by
type].
By clicking the button for the control unit, all the
•
stations connected to it are checked or canceled.
By clicking the button on the top of the list, all the
•
stations are checked or canceled.
Click
5
Close
after you have fi nished selecting the
stations.
In the previous window, the selection results are displayed
in the list.
When canceling a registered station, check the station in
*
the list, then click
Delete
.
Register PA outputs in the same way as the stations.
*
Click
6
Temporarily stored
to save the current setting
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or “Refresh” in the
web browser menu.
Registering sound fi les for chime
[Chime setting – Registering sound source]
Register sound data as the source of each chime. Copy MP3-
format sound fi les onto the PC in advance. (Only MP3 fi les can
be registered in the system.)
* Up to 3MB of the total amount of fi les can be registered.
* Use sound fi les compliant with the specifi cations below.
Click
1
Registering sound source in the table of
contents.
Click
2
Add
.
Another window opens.
Click
3
Browse...
and select a sound fi le on the PC.
Click
4
Upload
to save.
When uploading the fi le is completed successfully, the
current window closes. In the previous window, the
selection result is displayed in the list.
If a small-size sound fi le is registered, a fi le size different
*
from the actual one may be displayed.
Repeat step
5
2 to 4 to register more sound fi les.
If you wish to delete a sound fi le, check it in the list, and
*
then click
Delete
.
Sound fi le specifi cations
Item Recommended value
File name Up to 24 alphanumeric characters
File format MP3*
1
Bit rate 64 kbps
Sampling frequency 44.1 kHz
Channels 1 ch (monaural)
Maximum total data size 3MB in total, 2MB/fi le
*
1
: MP3-format sound fi les with tags may not be played with this
system. Before registering an MP3-format sound fi le, delete the tag
from the fi le.