Filter
Top Products
9
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Title Sub title Item Sub item Setting range Default
Timer setting - Scan monitor:
Switching
- 5 to 60 (sec.) 7 (sec.)
Contact output External sound source 1 10 to 300 (sec.) 30 (sec.)
External sound source 2 10 to 300 (sec.) 30 (sec.)
Door release - 0 to 300 (sec.), (0: Released while
holding the Door release button
pressed.)
10 (sec.)
Remote site
pilot call setting
- Remote site master
call
Normal/Priority/Urgent (Select one from the registered stations
in your site for each of “Normal”, “Priority”
and “Urgent”.)
-
Remote site door call Normal/Priority/Urgent (Select up to 20 stations from the
registered master stations in your site for
each of “Normal”, “Priority” and “Urgent”.)
-
Remote site room
sub call
Normal/Priority/Urgent (Select up to 20 stations from the
registered master stations in your site for
each of “Normal”, “Priority” and “Urgent”.)
-
Remote site paging Normal/Priority/Urgent/
Broadcast
(Select one from the registered zones in
your site for each of “Normal”, “Priority”,
“Urgent” and “Broadcast”.)
-
Remote site chime Zone name (Select one from the registered zones in
your site for each of “Normal”, “Priority”
and “Urgent”.)
-
Sound fi le name/sequence name Sound fi le: SF1 - SF15
Sound sequence: SS1 - SS20
-
Telephone
setting (North
America only)
- Telephone
connection
- ON/OFF OFF
Called telephone
number
1/2/3 (1 to 30 digit number can be set for each
by using “0 - 9”, “,” and “
_
”.)
-
Call change time - 10 – 60 (sec.) 30 (sec.)
Telephone pass code - 3 to 4 digit number 0000
Dial pause duration - 1 to 10 (sec.) 1 (sec.)
DTMF duration - 50 to 300 (msec.) 80 (msec.)
Waiting time for ring-
back-tone
- 1 to 30 (sec.) 15 (sec.)
Telephone pass code
input time
- 3 – 15 (sec.) 3 (sec.)
Dial-tone detecting
time
- 1 – 15 (sec.) 5 (sec.)
Sound detection
waiting time
- 500 – 1500 (msec.) 500 (msec.)
Sound detection time - 300 – 1000 (msec.) 300 (msec.)
Call detection time - 100 – 1000 (msec.) 200 (msec.)
Detection setting
Outgoing
call tone
detection
Dial-tone detection
ON/OFF ON
Outgoing call tone
detection priority
Normal/Priority Normal
Called party
answer
detection
Shorter ring-back-tone
than previous one
ON/OFF ON
Ring-back-tone detection time:
0.5 - 10.5 (sec.)
0.5 (sec.)
End of ring-back-tone
ON/OFF ON
Waiting time for ring-back-tone:
0.5 - 10.5 (sec.)
5.5 (sec.)
Called party hang-
up detection
Busy tone detection ON/OFF ON
Dial tone detection ON/OFF ON
CPC signal detection
ON/OFF ON
CPC signal detection time:
50 - 1000 (msec.)
250 (msec.)
Reverse polarity
detection
ON/OFF ON
Video setting - Frame Rate - 1/2/5/7.5/10/15 (fps) 15 (fps)
Quality - Low, Middle, High, Excellent Excellent