Filter
Top Products
15
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
Complete the network settings for your site by following
Flow 1
,
Flow 2
or
Flow 3
. (→P. 12-14)
Get the following information for the remote sites you will
connect with your site.
"Global IP address"
"Connection port: global"
"Connection Password"
Set the following setting items on the IP host unit. (→ P. 19)
[Network setting: Individual] :
"Default Gateway"
[Network setting: Common] :
"UPnP"
"Global IP address"
"Audio/video port"
Make the [Area/Site registration] on the IP host unit. (→ P. 21)
* Select "Site" with the "Area/Site" pull-down menu and enter
the information of the site you will connect.
Open the [IP unit registration] window on the IP host unit,
and then click the
Port forwarding setting
button. (→ P. 22)
Another window opens and the port forwarding setting
*
contents are displayed.
: Settings on the IP host unit
: Required when [UPnP] is set
to OFF at [Network setting:
Common] (→ P. 19)
Procedure
Remote site connection settings
You need to make the remote site connection settings to enable communication between your site and remote sites. Make the settings
by following the procedure below after the network settings for your site have fi nished.
Update the system at [Updating the system]. (→ P. 35)
Set the router with the port forwarding setting contents you
confi rmed in the previous step.
* This is the outline of setting fl ow. Also make the detailed settings on each setting window referring to the corresponding pages.