Filter
Top Products
25
GETTING STARTED USING THE SYSTEM APPENDIX
SETTING THE SYSTEM
B
Settings on [Contact input] window (for room
sub stations only)
Make settings for contact input.
[Contact type]:
•
Select either Normally open (NO) or Normally closed (NC).
[Call priority/Answering the page]:
•
You can select the action of the station when detecting
input between ‘calling with appropriate priority’ and
‘answering the page’.
Select “Normal”, “Priority”, “Urgent” or “Answering the
page”.
Close
•
Click this to close the current window and return to the
previous window.
C
Settings on [Other] window
[Transmit volume boost at PTT]:
•
Select whether to increase the press-to-talk sound
volume transmitted to the stations (ON) or not (OFF).
[Camera zoom image preset] (video door stations
•
only):
Select the default of camera’s Zoom/Wide function at
calling from the 9 zoom positions and "0" (wide) from the
pull-down menu.
[Call acknowledge tone on/off]:
•
Select whether to sound the call acknowledge tone of
door station or room sub station (ON) or not (OFF).
[Backlight adjustment] (video door stations only):
•
Select the method of adjusting the backlight in the
daytime between “Exposure +” and “Exposure –”.
[Speaker] (room sub stations only):
•
Select the speaker to be used between “Built-in speaker”
and “External speaker”.
When “External speaker” is selected, no sound will be
*
output from the built-in speaker.
Close
•
Click this to close the current window and return to the
previous window.
About the priority
The order of priority for actions (communication, calling, paging,
monitoring, etc.) is as follows depending on the priority setting.
Priority Setting Action
1 (high) [Urgent], [Broadcast] Communication, calling,
paging, chime paging
2 [Priority]
3 [Normal]
4 (low) - Monitoring, scan-monitoring
Making detailed settings to master
stations
The following setting item buttons are displayed in the
“Advanced settings” window.
Click either the button
*
D
or
E
to open the
corresponding setting window, and then make the
settings in the displayed window(s). See the detailed
instructions for
D
or
E
below.
Click
*
Close
to close the current window and return to
the previous window.
D
Settings on [Stations to be scan monitored]
window
Set the scan-monitoring target sub station(s).
Up to 20 sub stations in your site can be set.
*
Click
1
Reference
to open another window, then select
the target stations, and then click
Close
to return to
the previous window.
The selected stations are added and displayed in the
list.
To delete a station (or stations) from the list, check the
*
target station(s) in the list and click
Delete
.
Repeat step
2
1 to register more stations.
Click
3
Close
to close the current window and return to
the previous window.
E
Settings on [Other] window
[Master station function: paging, chime, monitor,
•
door release, and remote site call]:
Select whether to enable the following functions of
master station (ON) or not (OFF).
Starting paging
•
Starting chime paging
•
Monitoring/scan-monitoring
•
Releasing door
•
Remote site call
•
Close
•
Click this to close the current window and return to the
previous window.
D
E