Filter
Top Products
61200375L1-1
TA 850
T1 RCU VoATM UIG/61200376L2-31A
Page 71 of 72
© 2001, ADTRAN, Inc. TA 850 User Manual
Appendix G. RFC1483 Quick Start (Bridging)
The TA 850 allows for complete integration of voice and data delivery from one compact platform. Once you have
completed the voice turn up procedure from the previous example, adding data to the circuit requires some additional
setup.
To configure a TA 850 for Bridging, you need to know the VPI and VCI values for the data circuit on your network.
Bridging
Step Action
1
From the TA 850 main menu, select the
W
AN
menu. (Here you set up
the ATM network.)
2
Select the
ATM C
ONFIG
menu.
3
Enter the I
DLE
C
ELLS
format for your network.
4
Set D
ATA SCRAMBLING
appropriately for your network.
5
Back all the way out to the top level TA 850 menu, and then select the
R
OUTER
menu.
6
Enter the
C
ONFIGURATION
menu.
From this menu, you will set up addresses for your LAN and WAN.
For basic IP routing, use all the default values from the
G
LOBAL
menu.
7
From the E
THERNET
menu, enter the IP menu to enter your LAN
configuration.
8
Enter your LAN
IP
ADDRESS
and
S
UBNET
M
ASK
.
For this example, the IP
ADDRESS
is 192.168.1.2 and the
S
UBNET
M
ASK
is 255.255.255.0.
9
Arrow back to the main R
OUTER
C
ONFIGURATION
menu, and select the
WAN
menu and then the ATM menu. (Here you will enter your data
PVC information.)
10
Create a new PVC by entering the menu. Enter your VPI and VCI
values.
11
Disable IP on the RFC1483 IP
menu and enable Bridging on the
RFC1483 B
RIDGE
menu. (This enables the TA 850 as a bridge.)
12
Arrow back to the top level TA 850 menu to activate your changes.
All packets that come in on the Ethernet will be forwarded on the WAN.