Filter
Top Products
61200375L1-1
TA 850
T1 RCU VoATM UIG/61200376L2-31A
Page 43 of 72
© 2001, ADTRAN, Inc. TA 850 User Manual
RIP
Use this menu to enable RIP on the WAN interface. (See RIP on page 40 for description of options.)
RFC 1484 Bridge
This is used to enable bridge mode on this PVC.
Configuring the Router – Status
Use the R
OUTER
/S
TATUS
menu to view and set the parameters shown in Figure 12. The R
OUTER
/S
TATUS
screens give the user useful information for debugging the current routes in the 850.
Figure 12. Router/Status Menu
>Session
This menu maintains statistics about the active ATM PVCs.
>ARP cache
This is a listing of the currently connected Ethernet port on the LAN.
>Bridge Table
This shows the detected MAC addresses and the interface to which they are associated.
>IP Routes
This shows the current routes in the 850 and their use.
>LAN Stats
This shows traffic over the LAN interface.
NAPT A
DDRESS
Represents the public address thatis being used as the
NAPT address.
E
NTRY
C
OUNT
The number of entries in the NAT table.
E
NTRY
O
VERFLOW
C
OUNT
A count of the dropped entries due to low memory.