Filter
Top Products
61200375L1-1
TA 850
T1 RCU VoATM UIG/61200376L2-31A
Page 5 of 72
© 2001, ADTRAN, Inc. TA 850 User Manual
FCC regulations require that the following information be provided in this manual
to the customer:
1. This equipment complies with Part 68 of the FCC rules. The required label is
affixed to the bottom of the chassis.
2. An FCC-compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone net-
work or premises wiring using a compatible modular jack which is Part 68-
compliant. See installation instructions for details.
3. If your telephone equipment (TA 850) causes harm to the telephone network,
the telephone company may discontinue your service temporarily. If possible,
they will notify you in advance. But if advance notice isn’t practical, you will
be notified as soon as possible. You will be advised of your right to file a com-
plaint with the FCC.
4. Your telephone company may make changes in its facilities, equipment, opera-
tions, or procedures that could affect the proper operation of your equipment. If
they do, you will be given advance notice to give you an opportunity to main-
tain uninterrupted service.
5. If you experience trouble with this equipment (TA 850), please contact ADT-
RAN for repair/warranty information. The telephone company may ask you to
disconnect this equipment from the network until the problem has been cor-
rected or until you are sure the equipment is not malfunctioning.
6. This unit contains no user-serviceable parts.
7. The FCC recommends that the AC outlet to which equipment requiring AC
power is to be installed is provided with an AC surge arrester.
8. The following information may be required when applying to your local tele-
phone company for leased line facilities.
For a T1 Port:
Service Type REN/SOC FIC USOC
1.544 Mbps - SF 6.0N 04DU9-BN RJ-48C
1.544 Mbps - SF and B8ZS 6.0N 04DU9-DN RJ-48C
1.544 Mbps - ESF 6.0N 04DU9-1KN RJ-48C
1.544 Mbps - ESF and B8ZS 6.0N 04DU9-1SN RJ-48C