Filter
Top Products
61200375L1-1
TA 850
T1 RCU VoATM UIG/61200376L2-31A
Page 29 of 72
© 2001, ADTRAN, Inc. TA 850 User Manual
Start Transfer
This activator is used when the configurable items in this menu are complete.
Abort Transfer
Use this activator to cancel any TFTP transfer in progress.
>Config Transfer
Used only with TFTP transfers. Sends a file containing the TA 850 configuration to a file on a TFTP server using the
TFTP protocol. C
ONFIG
T
RANSFER
also lets you save the TA 850 configuration as a backup file, so you can use the
same configuration with multiple TA 850 units. In addition, C
ONFIG
T
RANSFER
can retrieve a configuration file from
aTFTPserver.
To support these transfers, ADTRAN delivers a TFTP program with the TA 850 called TFTP Server. You can config-
ure any PC running Microsoft Windows with this software, and store a configuration file. See Appendix B. Updating
TA 850 Firmware using TFTP on page 57 for details on how to use TFTP Server.
Only one configuration transfer session (upload or download) can be active at a time.
Transfer Method
Displays the method used to transfer the configuration file to or from a server. Currently, you must use TFTP.
Transfer Type
Only B
INARY
transfers are currently supported.
TFTP Server IP Address
Specifies the IP address of the TFTP server. Get this number from your system administrator.
TFTP Server Filename
Defines the name of the configuration file that you transfer to or retrieve from the TFTP server. The default
name is
ta 850.cfg
, but you can edit this name.
Current Transfer Status
Indicates the current status of the update.
Before using S
TART
T
RANSFER
, the TA 850 should have a valid IP address, subnet mask, and default
gateway (if required).
Before using C
ONFIG
T
RANSFER
, the TA 850 should have a valid IP address, subnet mask, and
default gateway (if required).