Filter
Top Products
TA 850 User Manual © 2001, ADTRAN, Inc.
61200375L1-1
TA 850
T1 RCU VoATM UIG/61200376L2-31A
Page 32 of 72
>Data Scrambling
D
ATA
S
CRAMBLING
can be E
NABLED
or D
ISABLED
for cell traffic. Configuring this setting incorrectly for a particular
circuit will cause poor performance at the ATM layer.
Configuring WAN Settings –ATM Stats
Use the W
AN
menu (Figure 5 on page 31) to access the ATM S
TATS
menu (Figure 7) and view the parameters listed
below the figure.
Figure 7. ATM Stats Menu
>AP: Tx Cells
This is the number of cells transmitted.
>AP: Rx Cells
This is the number of cells received.
>AP: Rx OAM Cells
This is the number of OAM cells received
>AP: Receive Cells Discarded
This is the number of cells received and discarded. An incrementing count in this field could indicate a con-
figuration problem with the ATM layer.
>AP: Receive Cell Errors
This is the number of cells received with an HEC error.
This setting must match the configuration setting of the ATM switch or DSLAM at the other end of
the circuit.