Filter
Top Products
Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 97
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > STATE
The state of the virtual circuit:
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > TX FRAMES
Number of Frame Relay packets that have been transmitted via this DLCI.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > RX FRAMES
Number of Frame Relay packets that have been received via this DLCI.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > TX BYTES
Number of Frame Relay bytes that have been transmitted via this DLCI.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > RX BYTES
Number of Frame Relay bytes that have been received via this DLCI.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > DE COUNT
Number of packets received on this DLCI with the Discharge Eligible (DE) bit set.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > CR COUNT
Number of packets received on this DLCI with the Command Response (CR) bit set.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > BECN COUNT
Number of packets received on this DLCI with the Backward Explicit Congestion Notification (BECN) bit
set.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > FECN COUNT
Number of packets received on this DLCI with the Forward Explicit Congestion Notification (FECN) bit
set.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > UNKNOWN FRAME RX
Number of frames that have been received that the unit does not know where to route.
L2 PROTOCOL (TDM–T1–FRE) > STATUS > PVC(S) > CLEAR STATS
Clears all gathered statistics for this interface and returns counters to 0.
I
NACTIVE
The circuit exists but has been deactivated by the Frame Relay switch.
A
CTIVE
The circuit is fully active.