Filter
Top Products
Section 4 User Interface Guide Total Access 600 Series System Manual
64 © 2004 ADTRAN, Inc. 61200624L1-1B
SYSTEM CONFIG > NETWORK TIME > ADJUST FOR DAYLIGHT SAVING
Since some areas of the world use Daylight Savings Time, the unit is designed to adjust the time on the
first Sunday in April and the last Sunday in October accordingly if this option is turned on. The factory
default is
Y
ES
.
SYSTEM CONFIG > NETWORK TIME > HOST ADDRESS
This is the IP address of the time server that the unit will request and receive time from. The factory default
is no entry in the host address field.
SYSTEM CONFIG > NETWORK TIME > REFRESH
This is the interval of time between each request the unit sends out to the time server. A smaller refresh
time guarantees that the unit receives the correct time from the server and corrects possible errors more
quickly. This may be more taxing on the machine. A range of refresh times is available for the user to
decide which is best for their unit. Choices include
5
MINS
, 10
MINS
, 15
MINS
, 20
MINS
, 25
MINS
, 30
MINS
, 35
MINS
, 40
MINS
, 45
MINS
, 50
MINS
, 55
MINS
, and 60
MINS
. The factory default is 60
MINS
.
SYSTEM CONFIG > NETWORK TIME > STATUS
This displays the current status of the time negotiation process. If an error is displayed, check all
connections and configurations to try to resolve the problem.
S
YSTEM
U
TILITY
Use the S
YSTEM
U
TILITY
menu to view and set the system parameters shown in Figure 5.
Figure 5. System Utility Menu