ADTRAN 606 Telephone User Manual


 
Total Access 600 Series System Manual Section 4 User Interface Guide
61200624L1-1B © 2004 ADTRAN, Inc. 119
BRIDGE > STATUS > BRIDGE TABLE > LOCATION
Location indicates if it is LAN or WAN. This is a read-only field.
BRIDGE > STATUS > BRIDGE TABLE > TTL
Time to Live (TTL) is the number of seconds until the address is removed from the table. This is a read
only field.
R
OUTER
Configure the router parameters and view routing statistics from this menu as shown in Figure 8.
Figure 10. Router Menu
ROUTER > CONFIG
Configure the interfaces, routes, DHCP Server, and UDP Relay options from this menu.
ROUTER > CONFIG > INTERFACES
Configure the layer 3 options for the Ethernet and network interfaces from this menu.
ROUTER > CONFIG > INTERFACES (ETH)
Configure the layer 3 options for the Ethernet parameters from this menu.
The Ethernet port will always appear in the R
OUTER
> C
ONFIG
> I
NTERFACES
table
regardless of the L2 protocol mode setting.