Filter
Top Products
Wall mounting the M6320: continued
45
5. Position the handset retainer (C in Figure 2) into the handset cradle.
The handset retainer is included in the stand assembly. Insert the two
plastic tabs (D) on the retainer into the two holes provided. Press firm-
ly until the retainer clicks into place.
6. Attach the telephone set to a standard wall bracket using the mounting
holes provided on the wedge-shaped base. Once mounted on the wall
bracket, the telephone set should hang flush to the wall. Note that the
knock-out section removed in step 3 allows enough space to accom-
modate the line cord connecting block, if present.
D
C
Figure 2 - Handset retainer installation