Filter
Top Products
Line Keys, Programmable Keys, and Softkeys
41-001451-00 REV00 – 07.2011 92
8. In the "Label" field, enter a label for the pickup softkey.
Note:
The” Value” and “Line” fields are configured by the Administrator.
9. In the state fields, check (enable) or uncheck (disable) the states you want to apply to this softkey.
10. Click Save Settings.
11. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Programmable Keys
12. Select from "Key 1" through "Key 6".
13. In the "Type" field, select Park.
14. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
The” Value” and “Line” fields are configured by the Administrator.
15. Select from "Key 1" through "Key 6".
16. In the "Type" field, select Pickup.
17. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
The” Value” and “Line” fields are configured by the Administrator.
18. Click Save Settings.
19. Click on Reset, then click Restart to restart the IP phone and apply the changes.
Expansion Module Keys
20. Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
21. In the "Type" field, select Park.
22. (M675i) In the "Label" field, enter a label to display on the IP phone for this key.
23. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
The” Value” and “Line” fields are configured by the Administrator.
24. Select from “Key 1” through “Key 36” (M670i).
or
Select from “Key 1” through “Key 60” (M675i).
25. In the "Type" field, select Pickup.
26. (M675i) In the "Label" field, enter a label to display on the IP phone for this key.
27. In the "Value" field, enter the appropriate value for accessing specific services from the server.
Note:
The” Value” and “Line” fields are configured by the Administrator.
28. Click Save Settings.
29. Click on Reset, then click Restart to restart the IP phone and apply the changes.