Filter
Top Products
Line Keys, Programmable Keys, and Softkeys
41-001451-00 REV00 – 07.2011 62
Press-and-Hold to Create a Speed Dial (applicable to programmable keys, softkeys, keypad keys, expansion
module keys)
Pressing and holding down a programmable key, softkey, keypad key, or expansion module key on the phone initiates a
speed dial feature.
IP Phone UI
Note:
When creating a speed dial key from the IP Phone UI, you must select a softkey, keypad key, or expansion module key
that has no preassigned function (key must be set to None or Empty.) If you press and hold a keypad key that is already
configured as a speed dial, the speed dial information displays on the screen for you to edit.
1. Press a programmable key, softkey, keypad key, or expansion module key for 3 seconds.
The following screen displays:
Note:
You can press the "Cancel" softkey at anytime during the speed dial programming to cancel and not save the speed
dial information.
2. In the "Enter Name:" field, enter a name to apply to the speed dial key.
Use the keypad keys to enter the name. Continue to press the keypad keys to access the next letter for that key (i.e.
press 2 three times to access C). Press 4 to move to the next space, or wait for the cursor to automatically advance
to the next position. To insert a space between letters, press 4. To backspace and erase a mistake, press the Backspace
softkey.
Note:
The phone automatically uses an uppercase letter for the first letter of each word and a lowercase letter for all subse-
quent letters in the word. If necessary, use the "ABC 4" softkey to specify uppercase letters or lowercase letters when
entering the name.
You can enter up to 16 letters in the "Enter Name:" field.
Press the 2 key to move to the next field.
Enter Name:
Enter Number:
Line: 1
- Save
- Backspace
- ABC
Cancel -