Filter
Top Products
Line Keys, Programmable Keys, and Softkeys
55 41-001451-00 REV00 – 07.2011
Keys can also be set up to quickly to access features such as Call Return (*69) or Voicemail.
The following paragraphs describe how to configure each function listed in the previous table.
XML Indicates the key is configured to accept an XML application for accessing customized
XML services. You can also specify an XML key URL for this option.
Flash Indicates the key is set to generate a flash event when it is pressed on the 6735i. The IP
phone generates flash events only when a call is connected and there is an active RTP
stream (for example, when the call is not on hold).
Sprecode Indicates the key is configured to automatically activate specific services offered by the
server. For example, if the sprecode value of *82 is configured, then by pressing the
sprecode key, *82 automatically activates a service provided by the server. Contact
your System Administrator for available services.
Park Indicates the key is configured to park incoming calls when pressed.
Pickup Indicates the key is configured to pick up parked calls when pressed.
Last Call Return (lcr) Indicates the key is configured for “last call return” when pressed.
Call Forward Indicates the key is configured as a Call Forward key. When pressed, the IP Phone UI dis-
plays the Call Forward menus.
BLF/Xfer Indicates the key is configured as a simplified BLF key and a transfer key. You can use
this key to perform the BLF function, or you can use it as a transfer key to transfer calls.
Speed Dial/Xfer Indicates the key is configured as a simplified speed dial key and a transfer key. You can
use this key to perform speed dial functions, or you can use it as a transfer key to trans-
fer calls.
Speed Dial/Conf Indicates the key is configured as a speed dial key and a conference key. You can use
this key to speed dial from within a conference call, and add the new call directly to the
conference.
Directory
(Key 7 by Default)
Indicates the key is configured to access the Directory List.
Intercom Indicates the key is configured to be used for intercom calls.
Services
(Key 8 by Default)
Indicates the key is set to access Services, such as, Directory List, Callers List, Voicemail,
or any other XML applications set up by your System Administrator.
Phone Lock Indicates the key is configured as a phone lock key, allowing you to press this key to
lock/unlock the phone.
Paging Indicates the key is configured as a Paging key. When pressed, the phone can send Real
Time Transport Protocol (RTP) streams from a preconfigured multicast address without
involving SIP signaling. You can also receive RTP streams from preconfigured multicast
addresses (can specify up to 5 addresses) using the "Paging Listen Addresses" at the
path,
Basic Settings->Preferences->Group Paging RTP Settings in the Aastra Web UI. For more
information about setting this parameter, see “Group RTP Paging (receives RTP
streams)” on page 183.
Note:
Quick access features like Call Return and Voicemail must first be configured on your PBX in order to work on your phone. See
your System Administrator for more information.
Key Function Description