Filter
Top Products
Line Keys, Programmable Keys, and Softkeys
93 41-001451-00 REV00 – 07.2011
Using the Park Call/Pickup Parked Call Feature
Use the following procedure on the IP phone to park a call and pick up a parked call.
Park a Call
If the call is parked successfully, the response is either a greeting voice confirming that the call was parked, or a hang up
occurs. The parked call party hears music on hold.
Pickup a Parked Call
1. While on a live call, press the "Park" key.
2. Perform the following for your specific server:
For Asterisk Server
Server announces the extension number
where the call has been parked. Once the
call is parked, press the key to
complete parking.
For BroadWorks Server
After you hear the greeting from the Call-
Park server, enter the extension where
you want to park the call.
For Sylantro Server
Enter the extension number where you
want to park the call, followed by "#" key.
For ININ Server
Enter the extension number where you
want to park the call, followed by "#" key.
3. If the call fails, you can pick up the call (using the next procedure) and press the "Park" key again to retry step 2.
1. Pick up the handset on the phone.
2. Enter the extension number where the call was parked.
3. Press the "Pickup" key.
If the call pick up is successful, you are connected with the parked call.