Filter
Top Products
25
Configuring Settings
CONFIGURATIONS
English
4 Change the parameter.
The following figure shows an example in which “1.
IP Address” is selected. For details on parameters of
each menu item, see “Setting Menu List” (page 26).
5 To confirm the setting, press .
The setting is saved in this unit.
To return to the previous menu without
saving the setting
Press .
Follow the procedure below to configure settings using the
web menu through a PC. This method is useful when you
configure several menu items.
Microsoft Windows XP or Windows 2000 is required as the web
browser for viewing the web menu.
1 Check that this unit is turned on.
2 Launch the web browser on the PC, select
the “File” menu, and then “Open”.
3 Enter “http://(IP address of this unit)”, and
then click “OK”.
The main window for the web menu appears.
If the main window for the web menu is not
displayed, see “Q2: Web menu setting is not
available” (page 47).
(192.168.100.200)
[ ] [#]
192.168.100.200
IP Adress
^
Configuring settings using the web
menu
Note
01EN_00_PJP-100H_UCGB.book Page 25 Wednesday, August 23, 2006 3:04 PM