VTech VT 4121 Telephone User Manual


 
27
19.5 Receiving a Voice Page to All
Speakerphone Extension.
For example, if extension 12 sends a
Voice Page to all telephones in the sys-
tem, the extension telephone will show:
19.6 Meet Me Answer to All Page
Press PAGE or PAGE ALL to answer
the page. For instance, if extension 12
performs an All Page, the display
shows:
20. Do Not Disturb
You may use the DND feature to avoid
telephone interruptions. When acti-
vated, you will not hear incoming ring-
ing from outside lines, intercom calls
and pages.
While the telephone is idle:
Press DND. The display shows:
Note: Press DND again to deactivate
DND. The display will return to
the idle mode.
21. Using the Flash Button
You may use Flash instead of pressing
the hookswitch to access custom call-
ing features provided by your telephone
service such as call waiting, 3-way call-
ing, etc.
While on a line:
1. Press FLASH to obtain new dial
tone.
2. Dial the new telephone number or
service code.
22. Using the Pause Feature
During speed dialing you can use the
Pause feature to insert a delay in a di-
aling sequence. Pause may be needed
to access certain banking and long dis-
tance services. Each pause is 3 sec-
onds. During manual dialing, you can
press the button repeatedly to create a
longer delay.
While on a line:
1. Dial the numbers prior to the pause.
2. Press REDIAL/PAUSE.
3. Dial the remaining number after the
pause.
23. Auto Busy Redial
To continue dialing a busy number from
the telephone:
When you dial a telephone number that
is busy, hang up and perform the fol-
lowing steps.
1. Press SPEAKER (If you have Au-
tomatic Line Selection enabled, tele-
phone will automatically select a
line-proceed to Step 3.)
2. Press a line button.
3. Press REDIAL/PAUSE. The tele-
phone will dial the number. If the
distant party is still busy, the tele-
phone will hang up after about 15
seconds, it will then wait about 5
BASIC OPERATION