Filter
Top Products
17
11. Auto Mute Enable/Disable
Default Setting: Disable
This feature prevents unauthorized
eavesdropping when someone makes
a single page to you.
Note: For intercom page with
handsfree reply at your exten-
sion, Auto Mute must be set to
Disable.
1. Press PROGRAM.
2. Press VOLUME
until the display
shows:
3. Press MUTE (ENTER) . The display
shows:
4. Press VOLUME to choose be-
tween the enable or disable setting.
5. Press MUTE (ENTER).
12. Flash
Default Setting: 0.7 seconds
Range: 0.1 seconds to 1.2 seconds
This feature is typically used to access
custom calling service. You may also
use Flash to end a call without hanging
up the handset or pressing SPEAKER.
1. Press PROGRAM.
2. Press VOLUME
until the display
shows:
3. Press MUTE (ENTER). The display
shows:
4. Press VOLUME to choose the
flash length.
5. Press MUTE (ENTER) to save.
13. Speed Dial
You can store eighteen (18) frequently
dialed numbers in a speed dial bin by
pressing the appropriate speed dial
button during programming.
A number stored in the Called ID
memory can be stored in a speed dial
bin. You can store numbers in either
pulse or tone dialing modes. Pauses
and flashes may also be stored in
memory. Each speed dial bin can store
up to 16 digits (numbers) including
pause, tone, and flash.
13.1 Storing a Telephone Number in
Speed Dial
1. Press PROGRAM.
2. Press SPEED DIAL Button 1. The
display shows:
3. Press MUTE (ENTER). The display
shows:
PROGRAMMING