Filter
Top Products
26
20 answers:
4. Press CONFERENCE. The display
shows:
5. Hang up to end the conference.
Note: When you hang up extension 20
will still be connected to the line
until that extension hangs up.
19. Paging
19.1 Paging Another Speakerphone
1. Lift the handset.
2. Press PAGE. The display shows:
3. Dial the desired intercom number.
For instance, if you dial extension
15 the display shows:
4. Make your page announcement.
Note: Only VT4121 speakerphones
can receive voice paging.
19.2 Answering a Page
You will hear a tone prior to receiving a
voice page. You may then answer the
page using the speakerphone.
Note: If you have programmed Auto-
Mute, the Mute lamp will turn on
and sounds in your room will not
be heard by the calling party.
1. Lift the handset or press MUTE (EN-
TER) (if the Mute lamp is lit).
2. Hang up to end the call.
19.3 Changing Signaling Modes
If you have made a voice page to an
extension and do not receive a reply,
press ICM and the other extension will
begin tone signaling to alert users in
the area.
To Switch From Page Mode to Tone
Ringing:
After establishing a voice page to an-
other extension, press ICM.
To Switch From Tone Ringing to Page
Mode:
After establishing an intercom call,
Press PAGE.
19.4 To Voice Page All Speaker-
phone Extensions
1. Lift the handset.
2. Press PAGE ALL. The display
shows:
3. Announce your message.
BASIC OPERATION