VTech VT 4121 Telephone User Manual


 
23
2. Hang up.
Press ICM. If you want to make an
intercom call without
autotransferring the line or simply
hang up the handset and the line
will remain on hold.
11. Retrieving a Call on Hold
When you place a call on Hold at your
speakerphone you will hear a brief re-
mainder tone after 30 seconds.
To retrieve a held call press the line
button corresponding to the holding line.
12. Making an Intercom Call
12.1 Using the Handset
Note: Skip Step 1 if you programmed
the intercom for Automatic Line
Selection.
1. Press ICM. The display will show:
2. Lift the handset.
3. Dial the desired intercom number
(from 11 to 22). For instance, if you
dial intercom number 15 the display
will show:
When the person you called answers,
your display will show:
4. Hang up the handset to end the call.
Note1: If the telephone you are call-
ing is busy, you will hear busy
tone. If the telephone you are
calling is in Do Not Disturb
(DND) mode, you will hear
DND tone.
Note 2: If you do not perform Step 3
above within approximately 10
seconds, the intercom will be
released.
12.2 Using the Speakerphone
Note: Skip Step 1 below if you pro-
grammed the intercom for Auto-
matic Line Selection.
1. Press ICM. The display will show:
2. Press SPEAKER.
3. Dial the desired intercom number
(from 11 to 22). For instance, if you
dial intercom number 15 the dis-
play will show:
When the person you called answers,
your display will show:
4. Press SPEAKER to hang up.
Note 1: If the telephone you are call-
ing is busy, you will hear busy
tone. If the telephone you are
calling is in Do Not Disturb
BASIC OPERATION