Filter
Top Products
External PA paging to a specific zone is possible from any
master station by pressing after picking up a handset
It is possible to wait for a response in this mode, but any-
thing said will be broadcasted over the entire zone. It is
best to end the paging call by pressing
and waiting for a response.
or hanging up a handset
All-call paging of zones 1 through 45 can be done in both
the External PA paging mode through an external ampli-
fiers and speakers, and the station paging mode through
the station speakers. In the event of All-call paging, the
paging is done over the entire zones.
When all-call paging is initiated during zone paging, the
Zone paging is interrupted and restored after the all-call
paging is finished.
Paging response
1. Automatic response
To respond to a paging call, go to the nearest master sta-
tion and press either
(All-call paging response)
or
(Zone paging response)
A paging response is possible only from the station in
the paged zone.
A response to All-call paging is possible from any sta-
tion.
To respond to Zone paging by pressing
No. 200
registration of the stations (consecutive station numbers)
within each zone must be made. Such registration is
required for both external and station paging.
2. Zone number dialing __
To respond to a All-call paging, go to the nearest master
station and press
To respond to a Zone paging call, press
Zone No. 01 ~ 45
at the nearest station.
A response to the zone paging is possible only from a
station connected to the exchange that includes the
paged zone (Exchange "A": Zone No. 1 ~ 15, "B":
No. 16 ~ 30, "C": No. 31 ~ 45). It is not impossible to
respond from the station connected to the other
exchange.
A response to All-call paging is possible from any station.
All-call paging
Zone paging
Table of stations used for individual zone paging (Example)
(In the case of "Automatic response")
Zone
numbers
First station
number
Last station
number
All-Call Paging and Individual Zone Paging
Tie-line
Paging call
– 84 –