Filter
Top Products
Classification
Call
Function
Press-to-talk
Remote response
Remote response registration
Continuous calling tone response
Privacy
Secretary transfer
Single digit registration
Single digit dialing
Personal number registration
In/Out annunciation-lamp ON
Personal number cancellation
In/Out annunciation-lamp OFF
Personal number call
Personal number paging
Conference
Conference clear
Call forwarding registration
Mic off
Priority/priority response
Executive priority/
Highest executive priority
Call transfer
Dial operation
Simplex
Duplex
Confirmation tone
Privacy off
Secretary transfer off
Registration dials (maximum 4 digits)
Confirmation tone
Confirmation tone
Calling
Calling
Confirmation tone
Busy tone
Station called
Busy tone
Call conversation
Transfer
Conversation
with
original station
Number
Station No.
1000 ~ 1999
Station No., Personal No.,
Single digit number
Transfered Station No.
Station No., Personal No.,
Single digit number
Description
Conversation is simplex when PTT bar is used.
When a station is called by continuous calling
tone, near station in the groups can respond the
call instead of the called station.
Group registration of stations can be made from
each station.
Called party touches one of these keys then
conversation may begin.
When a party dose not wish to accept incom-
ming calls, set the Privacy Switch in the ON
position.
This function allows for automatic transfer of
calls to a secretary when desired.
This function allows for single digit registration
of up to 4 digits among the numbers 0 through
9 and the
key.
Registered dial code may be automatically
dialed.
Personal number may be resistered at any
master station which the person to whom the
number is assigned expects to be.
When anyone having a personal number leaves
the office he merely cancels the programming
of his personal number.
A personal number dialing enables the station
call or zone paging for a person having the
personal number.
A conference call may be made with up to 4
persons. Participants must be called individually.
If a person called into a conference is absent,
the conference may be returned to the original
condition.
This function allows for automatic transfer of
call to another station which number is
registrated already.
This function is used to temporarily hold a con-
versation, causing a holding tone to sound at both
stations. The line is thus kept open until the party
who operates the mic off switch re-dials and the
call is continued.
When the called party is busy, this function
signals to request priority. The party requesting
can talk after the called party responds.
When the called party is busy, this f unction allows
interruption of the existing conversation and
immediate direct contact with the called party.
The called party can transfer the call to a selected
other station (by station number, personal number
or single digit number).
EXES-6000, CP-64 Summary of Dial Operations (For single exchange system)
21 - -