Filter
Top Products
EXES-6000, CP-64 Summary of Dial Operations
Tie-line system of 2 or 3 exchanges
Station numbering: No. 200 ~ 455, No. 470 ~ 725, No. 740 ~ 995 (standard)
Tie-line
Classification
Call
Function
Press-to-talk
Remote response
Remote response registration
Continuous calling tone response
Privacy
Secretary transfer
Single digit registration
Single digit dialing
Personal number registration
In/Out annunciation-lamp ON
Personal number cancellation
In/Out annunciation-lamp OFF
Personal number call
Conference
Conference clear
Highest executive priority
Call transfer
Dial operation
Simplex
Duplex
Confirmation tone
Secretary transfer off
Registration dials (maximum 4 digits)
Confirmation tone
Confirmation tone
Calling
Calling
Busy tone
Call conversation
Transfer
Conversation with
original station
Number
Station No.
1000
~
1999
Station No., Personal No.,
Single digit number
Station No., Personal No.,
Single digit number
Description
Conversation is simplex when PTT bar is used.
When a station is called by continuous calling
tone, near station in the groups can respond the
call instead of the called station.
Group registration of stations can be made from
each station.
Called party touches one of these keys then
conversation may begin.
When a party does not wish to accept incom-
ming calls, set the Privacy Switch in the ON
position.
This function allows for automatic transfer of
calls to a secretary when desired.
This function allows for single digit registration
of up to 4 digits among the numbers 0 through
9 and the
key.
Registered dial code may be automatically
dialed.
Personal number may be resistered at any
master station which the person to whom the
number is assigned expects to be.
When anyone having a personal number leaves
the office he merely cancels the programming
of his personal number.
A personal number dialing enables the station
call for a person having the personal number.
A conference call may be made with up to 4
persons. Participants must be called individually.
If a person called into a conference is absent,
the conference may be returned to the original
condition.
When the called party is busy, this function
allows interruption of the existing conversation
and immediate direct contact with the called
Party.
The called party can transfer the call to a
selected other station (by station number,
personal number or single digit number).
– 66 –