Filter
Top Products
Classification
Paging
Display
and
Control
Data
Transmitting
and
Receiving
Unit
Function
<Tie-line system of 2 exchanges>
All-call plus 30-zone paging
<Tie-line system of 3 exchanges>
All-call plus 45-zone paging
All-call response
Zone paging response
Paging during normal call
One-shot make output
Make/break output
8-selectable one-shot make
output
8-selectable output
(Decimal output)
4 decimal digits output
Make output for Pager control
Pocket Pager response
Calling party selection
Clearing calling party indication
Dial operation
Conversation
Conversation after response
Paging
Transfer
Conversation
with
original station
(Make)
(Break)
Unit No.
Condition No.
Unit No.
Condition No.
Unit No.
4-digits
Number
00 (All-call), 01 ~ 30 (Zone)
00 (All-call), 01 ~ 45 (Zone)
01 ~ 45
01 ~ 15 (Exchange A)
16 ~ 30 (Exchange B)
31 ~ 45 (Exchange C)
000 ~ 499
00~49
000 ~ 511
00~99
1 ~ 9
1
~
8
1
~
9
01 ~ 64
(01 ~ 99)
1 ~ 8, 0 (Clear)
(0~9)
1 ~ 9
0000 ~ 9999
00~99
Station No.
Description
Any station can be used to initiate PA or station
paging. A person paged can respond from the
nearest master station.
Response to all-call
Response to zone paging
This function allows a called party to transfer
the call to a third party who responds to paging.
One-shot make output of relay may control
other equipments such as ITV camera, VTR
control, dictating systems, etc.
Make/break output of relay may control other
equipments.
8 selectable one-shot make is available (VTR
control)
8 selectable outputs or a decimal output is
available (indicating room status and
destination).
4 decimal digits output is indicated.
Control the pocket pager by make output of
relays.
When the indication panel shows several incom-
ing calls at the same time, the called party may
select any of them for response.
This is used to cancel the calling party indica-
tion without conversation.
67 - -