Filter
Top Products
3. Optional Functions
27) Station Paging and Response (PI-62 Unit is required)
Paging is available through the built-in station
speakers. Paging calls can be responded to by the
nearest master station.
28) Paging Priovity and Response (PI-62 Unit is required)
Conversation may be interrupted temporarily to
accept the priority station paging.
29) Combination Paging and Response
(PI-62 Unit is required)
Combination paging zones which cover 2 or more
independent paging zones is allowed in the system.
30) Paging during Normal Call
Calls can be transferred to a third party after paging
while speaking.
31) Personal Number Paging
Zone paging is made by Personal Numbers when
Personal Numbers are registered into any designated
station within a zone.
32) PA Paging and Response
(PI-62 Unit and PA System are required)
Paging through PA System and response.
33) Emergency All-Call Paging (PI-62 Unit is required)
Top priority of all-call paging is available from one
specified station.
34) Conference (CL-62 Unit is required)
Conference calls can be made including up to 4
persons.
35) Press-to-Talk Control (PI-62 is required)
The operation of Press-to-Talk activates Relay Out-
puts, thus controlling Door-Lock and Radio Trans-
mitting Equipment.
36) In/Out Annunciation
(Interface for the Indicator Board needs to be made
by using Data Transmitter DT E11 and Receiver DR-
B61)
In or Out status is annunciated by registration/
cancellation of Personal Numbers.
37) Destination Annunciation Indication
(Interface for the Indicator Board is to be made by
using Data Transmitter DT-E11 and Reciver DR-B61.)
Personal number registered stations are indicated.
38) Calling Party Indication [Lamp Type]
(Interface for the Indicator Board is made by using
Data Transmitter DT-E11 and Receiver DR-B61.)
One lamp for one calling station. This can memorize
the station numbers of stations which put through
calls to stations in the privacy or busy modes.
39) Calling Party Indication [7-SEG Display Type]
(Interface for the Indicator Board is made by using
Data Transmitter DT-E11 and Receiver DR-B61.)
A numerical type calling party indication panel can
be provided at certain specified stations.
40) Pager Calling and Response
(Interface is accomplished by using Data Transmitter
DT-E11 and Receiver DR-B61)
Pagers with relay input interface can be connected.
41) General Purpose Control
(Make the Indicator Board and General Purpose
Control Interface by using Data Transmitter DT-E11
and Receiver DR-B61)
Various types of Relay Output modes for control are
available. Use as Remote Control for such applica-
tions as In/Out Annunciation, Destination Annuncia-
tion Indication, VTR and ITV.
42) Simplified Paging
Simplfied PA paging is possible if an external speaker
is connected instead of a station.
– 20 –