Vizio EXES-6000 CP-64 Intercom System User Manual


 
Selectable First Station Number
The first station number for system may be selected
from any of the following numbers (Hardwired
station number):
The system with Personal Numbers can't use No.
100 ~ 199.
Note.
Station No. 200 programming is required when any
other numbering schedules than standard (No. 200 ~)
are used.
Programmable Station Numbering
This function allows the system to have "Programmable
station numbers", other than the "Hardwired station
numbers" by programming.
The unprogrammed stations are used as original
hardwired station numbers.
Type of dial operation
With Personal number
Without Personal number
Hardwired
station number
No.200 ~ 455
No.100~ 355
Programmable
station number
No.200 ~ 999
No. 100
~
999
1. Numbering schedules can be changed easily by pro-
gramming in stead of rewiring.
2. Numbering schedule (such as 200's, 300's, 900's) is
available for convenient office differentiation, (archi-
tectual numbering).
3. Normally, station numbers which are included in a
station paging zone must be sequential, but programm-
able station numbers can be randomly included in a
station paging zone.
4. This function is programmed at station No.200. Please
see Installation Instructions for EXES-6000 CP unit.
< Example >
Dialing
Exchange
Programmable station
No. 203
Circuit No. 201
(Hardwired station
number)
Circuit No. 203
(Hardwired station
number)
Programmable station
No. 201
5. People operating the intercom stations need not be
aware of the Hardwired station numbers. However, care
must be taken when programming using station No. 200
in the exchange, as hardwired station numbers must be
used for that purpose.
Hardwired
station number
2 0 1
202
203
204
205
Programmable
station number
201
202
301
302
Hardwired
station number
200
201
202
203
326
327
Department 1
Department 2
Hardwired
station number
2 0 1
202
203
Programmable
station number
201
231
2 4 1
Station
paging zone
Programmable
station number
203
201
– 49 –