Filter
Top Products
! For your
convenience a
remote operation
card is provided
for you to use
while away from
home
(refer to page 88).
Command Function Command Function
then Repeat a Message* # then Answering System On
then Play incoming Messages # then Memo Record/ Stop**
then Skip a Message # then Greeting Message
Record/ Stop**
then Delete a Message # then Answering System Off
then Stop Operation # then Help
#1 6
#2 7
#3 8
#4 9
#5 0
* For the Repeat a Message function, press # then within about four seconds to
repeat the previous message, or press # then after about four seconds to
repeat the current message.
** For Memo Record and Greeting Message Record function, the first time you
enter the corresponding command, it starts the Recording function. If you want
to stop the recording, enter the command again.
5) After the command has finished, you hear intermittent beeps indicating that the
system is in the command waiting mode. You may enter another command at
this time from the chart above.
6) When you are finished, hang up to exit the system. The answering system
automatically returns to standby.
1
1
[69]