Filter
Top Products
PHONEBOOK
Speed Dialing
You can program up to ten speed dial numbers in each handset and the base.
You must program a speed dial number before you can use the speed dialing
feature. When the phone is in standby mode, press and hold a number key ( - )
associated with the speed dial location desired until the phone number appears;
then press or , or pick up the corded handset. The number stored in
that speed dial location (SPD1 - SPD0) is then dialed.
1) When the phone is in standby mode, press .
To delete all phonebook locations, press
to select and
press soft key. appears.
Use to select , and then press the soft key.
You will hear a confirmation tone.
2) Press to select , and then press the
soft key.
3) Use or the number keypad to select desired phonebook
entry (see "Viewing the Phonebook" on page 44).
4) When you have found the desired phonebook entry, press the soft key to
edit the entry.
09
talk/flash
/volume up/down
/volume up/down
/volume up/down
/volume up/down
Editing or Erasing a Stored Name, Phone Number,
Distinctive Ring and Speed Dial
Base Instructions
Delete All
Delete All?
Yes
Dial/Edit
OK
OK
OK
EDIT
[46]
Phonebook : 50
Copy
All
Delete All
!
!
The Copy and
DeleteAll
options are not
available on the
handset.
The base display
is shown