Filter
Top Products
C. Install the rechargeable battery pack into the handset
1) Press down on the handset battery case cover
(use the finger indention for a better grip) and
slide the cover downward to remove.
2) Plug the battery pack connector (red & black
wires) into the jack inside the battery
compartment. (The connector notches fit into the
grooves of the jack only one way.) Match the
wire colors to the polarity label in the battery
compartment, connect the battery and listen for a
click to insure connection.
3) Make sure you have a good connection by
slightly pulling on the battery wires. If the
connection is secure, the battery jack will remain
in place.
4) Place the battery case cover back on the
handset and slide it upwards until it clicks into
place.
! Use only the
Uniden (BT- 446)
rechargeable
battery pack
supplied with
your cordless
telephone.
GETTING STARTED
[12]