Filter
Top Products
THE INTEGRATED
ANSWERING DEVICE
2) Press to select a Ring Time.
3) Press (or the soft key on the base). You will hear a confirmation
tone.
Record Time sets the duration for recording the incoming messages. You have
three record time options: "one minute" "four minutes" or "Announce Only".
"Announce only" answers the call but prevents the caller from leaving a message.
1) Press (or the soft key on
the base). Select the Answ. Setup menu, and
then the Record Time submenu.
2) Press to select Record
Time (1 Minute, 4 Minutes, or Announce Only).
3) Press (or the soft key on the base). You will hear a
confirmation tone.
Message Alert sounds an alert tone when you have an unheard message. If you
set Message Alert on, whenever a new message is received, the soft alert tone will
sound every 15 seconds. When all messages have been played back, the alert
tone automatically deactivates.
OK
MENU
OK
/volume up/down
select/
menu/del
/volume up/down
select/
Setting the Record Time
Setting the Message Alert On or Off
Record Time
1 Minute
4 Minutes
[58]