Filter
Top Products
THE INTEGRATED
ANSWERING DEVICE
Remote Key Function
Remote access away from home
/2 7
/5 8
60
Play incoming Messages Memo Record/Stop**
Stop Operation
Play Greeting Message Help
Greeting Message Record/Stop**
** For the Memo Record and Greeting Message Record functions, the first time
you enter the corresponding command, it starts the Recording function. If you
want to stop the recording, enter the command again.
5) After the command has finished, you will hear intermittent beeps indicating that
the system is waiting for a command. You may enter another command at this
time from the chart above.
6) When you are finished, press to exit the system.
You can operate your answering system from a remote location using any touch-
tone telephone.
1) Call your telephone number and wait for the system to answer. If the answering
system is off, it will answer after about ten rings and sound a series of beeps.
2) During the greeting message (or a series of beeps when the answering system
is off), press # and enter your PIN code within two seconds (see “Setting a
Security Code” on page 57).
3) The answering system announces the current time and the number of
messages stored in memory. You hear "To play incoming messages, press
pound-two. For help, press pound zero." You will hear a beep (Pressing pound is
the same as pressing the hash (#) key).
4) Enter a command within 15 seconds, each command there after must be
entered within two seconds. You may select a command from the following chart:
end
!
!
!
!
The time stamp
will not be heard
until you have set
the time. See
"Setting Day and
Time" on page 25.
The system will
only playback
messages for four
minutes and then
it returns to the
command waiting
mode. To
continue playing
your messages,
press # then 2
again within 15
seconds.
If you enter an
incorrect PIN code
three times, you
will hear a beep
and the system will
return to standby.
During the
remote
operation, Line
Remote appears
on the display.
[68]