Filter
Top Products
56
Li i
oistu
handset or base is exposed to moisture or liquid, but only rior plastic housing is affected, wipe off
• If moisture or li uid can b h
), follow w:
Hand Base
qu d Damage
re and liquid can damage your cordless phone. M
• If the
the liq
the exte
uid, and use as normal.
quid has entered the plastic housing (i.e. liq e eard in the phone or liquid has entered
the steps belo
the handset battery compartment or vent openings on the base
set
1. d leave it off for ventilation.
nd
ry pack disconnected for at least 3 days.
3. Once the handset is completely dry, reconnect the battery
from the
base.
2. Disconnect the telephone cord and the
USB cable from the base.
Remove the battery cover an
2. Disconnect the battery pack. Leave the battery cover off a
the batte
pack and the battery cover. 3. Let dry for at least 3 days.
4. Recharge the handset's battery pack for 15 hours before
using.
1. Disconnect the AC adapter
IMPORTANT: You must unplug the telephone line while recharging the battery packs to avoid charge interruption.
CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the
handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please
call our Customer Service Hotline (see back cover page).