Filter
Top Products
49
Tone Dialing Switch Over
If your phone is set to use pulse dialing for regular phone calls, you can switch to tone dialing after the call connects.
This feature is useful when you need tone dialing to use automated menu systems, such as telephone bank tellers,
telephone prescription refills, customer support menus, etc. Make your call normally. Once your call connects, press
*/TONE. Any digits you enter from then on will be sent with tone dialing. When this particular call ends, the phone
automatically returns to pulse dialing.
See
Changing the Dial Mode on page 15 for instructions on setting your phone for pulse or tone dialing.
Installing the Optional Headset
Your phone may be used with an optional headset. To use a headset,
open the rubber headset jack cover on the side of the handset and
insert the headset plug into the headset jack. (Headsets may be
purchased by calling the Uniden Parts Department. See back cover
page for contact information.)
Seven-Digit Dialing
If you can make a local call by dialing only 7 digits (instead of 10), you can program your local area code in your
phone. Calls that come from within your area code will show only the 7-digit phone number; calls from outside your
area code will show all 10 digits.
1. With the phone in standby, press the center of the joystick and select the system setup icon
.