Filter
Top Products
13
Installing the Handset Battery
Follow the steps below to install the battery.
1. Remove the cover from the
handset battery compartment.
Press in on the finger indention
and slide the cover downward.
2. Place the battery pack in the
battery compartment with the
green side up and the silver
connectors on the battery facing
the bottom of the handset.
NOTE: Use only the Uniden
BT-0003 rechargeable battery
pack with your phone.
3. Place the battery case cover back on
the handset and slide it upwards until
it clicks into place.
Installing the Belt Clip
Line up the holes on each side of the handset. To attach the belt clip, insert
into the holes on each side of the handset. Press down until it clicks.
To remove the belt clip, pull either side of the belt clip to release the tabs
from the holes.