Filter
Top Products
1) Remove the handset from the base unit.
2) Press and hold page/int’com on the base.
3) While the handset is emitting a paging sound, place the
handset on the base unit. The paging sound stops.
Leave the handset on the base for more than 3 seconds or
until the status LED stops flashing.
A new random security code is set.
[ 40 ]
ADDITIONAL INFORMATION
note
Changing the Digital Security Code
The digital security code is an identification code used to connect the handset
and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set.
(See page 4.) In the rare situation that you suspect another cordless telephone is
using the same security code, you can change the code.
If the handset battery
pack is completely
discharged or the
battery pack is removed,
the digital security code
will be lost.
If this happens, a new
security code is set
automatically next time
the battery pack is
charged.
TRU3466 ENG 8/8/01 12:19 PM Page 40