Filter
Top Products
note
Placing a Call on Hold
1) To place line 1 on hold at the base,
press hold. The line 1 LED turns from
green to red.
2) To place line 1 on hold at the
handset, press cid/hold.
The following screen appears:
3) To pick up the call that is holding,
press line 1 on the base or handset.
Using the Speakerphone Mute Feature
1) Press mute. The line 1 LED flashes red.
You can hear the party on line 1, but they cannot
hear you.
2) When you are ready to continue your conversation with
the party on line 1, press mute again or line 1 . The line 1
LED changes to green.
• Do not use the base
and the handset
keypads at the same
time to place a call
on hold.
• If a line is in use, or a
phone is off the hook,
”
In Use Line 1”
appears on the display.
BASICS
[ 20 ]
Your TRU3466 allows you to mute your conversation from the base. This prevents
the party you are speaking to from hearing what you, or someone else in the
room, is saying.
For example, to use this privacy feature while using line 1.
Use either the keypad on the handset or the keypad on the base.
TRU3466 ENG 8/8/01 12:18 PM Page 20