Filter
Top Products
[ 26 ]
MEMORY FEATURES
Storing a Phone Number and Name
Memory Dialing allows you to dial a number using just a few key presses.
TRU3466 series stores up to 30 names/numbers in the handset and 10 numbers in
the base.
WWiitthh tthhee HHaannddsseett
1) Press and hold memory until ”Memory Store” is displayed.
2) Press
▲
/up/intcm and
▼
/down/conf. or enter a number (
0011
-
3300
) to select the memory location where you would like
to store the number.
3) Press select/channel.
The following screen appears and a cursor flashes
indicating that the display is ready for the name to be
entered.
If this screen appears, the selected memory location is
already stored. Then you must either change the entry in
this location, clear the entry in this location, or select
”
Go back” to choose another location.
4) To enter a name (up to 13 characters), use the number keys.
• See ”Steps for Entering Names and Special Characters”. (See pages 28-29.)
•Use # /
s
and
*
/
tt
/tone to move the cursor to the desired locations.
•Use delete/volume to delete characters as needed.
•Press and hold delete/volume to delete all the characters.
•If a name is not required, go to step 5.
note
• In memory dialing
operation, you must
press a key within 20
seconds or the phone
will return to standby.
If you return the
handset to the base,
the phone will return
to standby also.
• You have 20 seconds
after pressing memory
to enter the number
you wish to store.
Otherwise, an error
tone will sound.
TRU3466 ENG 8/8/01 12:18 PM Page 26