Filter
Top Products
1) When the phone is in the standby mode,
press and hold cid/hold until the Caller
ID setting screen appears.
2) Press
*
/
tt
/tone or # /
s
to select ”Line1” or ”Line2”.
3) Press
▲
/up/intcm to select
”
Area Code”.
4) Press select/channel.
5) Use the dial buttons (0 to 9 ) to
enter the 3-digit area code.
6) Press select/channel. A tone sounds and the displayed area
code is entered.
7) Press cid/hold to complete the setting. Or return the handset
to the base unit. The handset returns to standby mode.
[ 12 ] GETTING STARTED[ 12 ]
note
If you enter your 3-digit area code number in the ”Area Code” option, your
local area code does not appear in the Caller ID messages. Do not program this
option, if your calling area requires 10-digit dialing. When reviewing Caller ID
messages, you will see only the local seven digit number. For calls received from
outside your local area code, you will see a full 10-digit number.
Entering Your Area Code
If your calling area
requires 10-digit dialing,
do not program this
option.
When the area code has already been stored in memory, the stored area code will be displayed.
To change it, use the delete/volume and number keypad to enter
the new area code. Then press select/channel. To complete the
setting, press cid/hold or return the handset to the base unit.
note
TRU3466 ENG 8/8/01 12:18 PM Page 12