Filter
Top Products
BASICS
[ 17 ]
BASICS
Traveling Out-of-Range
During a call, as you begin to move your handset too far from your base unit,
noise increases. If you pass the range limits of the base unit, your call will
terminate within 30 seconds.
Selecting a Different Channel
If you encounter interference while using your phone, you can manually change
the channel for clearer operation. Interference can come from appliances or other
phones in your home. This function works only when the phone is use.
The select/channel on the handset allows you to choose between 35 different
channels. During the course of a conversation, if you hear static or noise which
makes it difficult to hear, press select/channel. The following screen appears and
the phone changes to a different
channel. For more information on
interference, refer to ”Technical Information” on page 45.
Flash and Call Waiting
If you have ”Call Waiting” service and a call waiting tone
sounds while you are on a call, press flash to accept the waiting
call. There is a short pause, then you will hear the new caller.
To return to the original caller, press flash again.
note
You must subscribe through your local telephone company to receive Call Waiting Service.
note
The flash feature does
not function when
line 1 and line 2 are on
a conference call. (See
3-way conferencing and
4-way conferencing,
pages 22 and 23).
TRU3466 ENG 8/8/01 12:18 PM Page 17