Filter
Top Products
[ 9 ]
Place the power cord so
that it does not create a
trip hazard or where it
could become chafed
and create a fire or
electrical hazard.
!
GETTING STARTED [ 9]
GETTING STARTED
CC.. CCoonnnneecctt tthhee bbaassee uunniitt
1) Connect the AC adapter to the DC IN 9V
jack and a standard 120V AC wall outlet.
2) Set the base on a desk or tabletop,
and place the handset in the base
unit as shown.
3) Raise the antenna to a vertical position.
4) Make sure the status LED lights. If the LED does not light,
check to see that the AC adapter is plugged in and the
handset makes good contact with the base charging contacts.
• Use only the supplied AD-313 AC adapter. Do not use any other AC adapter.
• Connect the AC adapter to a continuous power supply.
• Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
note
TRU3466 ENG 8/8/01 12:18 PM Page 9