Filter
Top Products
[ 7 ]
GETTING STARTED
GETTING STARTED
BB.. IInnssttaallll tthhee bbaatttteerryy ppaacckk
CChhaarrggee tthhee bbaatttteerryy ppaacckk ffoorr aatt lleeaasstt 1122--1155 hhoouurrss bbeeffoorree
pplluuggggiinngg tthhee pphhoonnee lliinnee iinnttoo yyoouurr pphhoonnee..
1)Press in on the battery cover release and slide the cover
down until it comes off.
2)Connect the battery pack connector observing correct
polarity (black and red wires) to the jack inside the battery
compartment.
Do not exert any force on this connection. It could cause
damage to the battery or handset. The plastic connector
will fit together only one way. Once you are certain that
you have made a good connection, then insert the battery
pack into the battery compartment. Do not pinch the wires.
3)Securely close the battery compartment cover by sliding it
up until it snaps into place.
4)Place the handset on the base.
Use only the Uniden
battery (BT-905)
supplied with your
phone. Replacement
batteries are also
available through the
Uniden Parts
Department
(see page 5).